info@robo-dyne.com
Language
ItalianEnglish
robodyne robotics

MaXXII-S
Electric Tracked Ground Vehicle with suspensions

MaXXII-S is the first electric skid-steering tracked mobile robotic platform with an advanced suspensions system designed to be used for a large variety of applications and to speed up your robotics research! MaXXII-S mounts different shock absorbers with preload adjusters to allow the whole tracked undercarriage configuration to adapt to the terrain profile by minimizing the soil vibrations. The unit can be configured with 360° Laser Sensor, RGB-D camera, motor encoders, current sensors and RTK GPS. Thanks to its rubber tracks, it can be used both for indoor and outdoor applications and its payload allows the users to add additional devices and laptops. Moreover, it provides several power output in order to connect multiple devices. The large ground clearance lets the vehicle to overcome obstacles like rocks and debris. It is particularly useful for autonomous navigation for agricultural tasks automation.

POWERFUL SUSPENSIONS

MaXXII-S suspensions are designed to adapt the rubber track undercarriage to the terrain profile and to minimize the vibrations generated by track-terrain interactions on rough soil. The rubber tracks are robust and high flexible to easily accommodate the shock absorbers movements.

_________________________________________

The springs of the shock absorbers used as dampers for the suspension system can easily be replaced to change the elastic module and tune the overall system behavior.

Ask us more information

IT IS ROS READY!

MaXXII-S comes with a well-documented ROS node which allows the user to remotely control the robot and to easily integrate sensors, devices and actuators. It also includes C/C++ library for cross-platform development and for third-party integration. The user can move the robot by using the standard geometry_msgs ROS messages.

TUNE THE SYSTEM

Both the rear wheels and the other free wheels of each rubber track are directly connected to high efficiency shock absorbers used as dampers; to better adapt the system behavior to different applications, the user can change the springs and can also adjust the spring preload.

DRIVE OVER THE NIGHT

MAXXII is not afraid of the night! Thanks to a powerful 20W headlight with 1580lm mounted on its front and rear bumpers, you can face the night without problems! You can use this vehicle for surveillance or for inspections in no light conditions and in rought environments since boht lights are IP67 and come with LED technology.

SENSORS ACQUISITION

The suspension system is able to reduce the vibrations on the vehicle main frame and, as a consequence, it results in an improved stability for a series of sensors like inertial sensors and cameras by also reducing the noise during the acquisitions.

READY FOR ROBOTICS AGRICULTURAL RESEARCH!

MaXXII-S has been carefully design to assist the researchers all over the world to speed up their applications and their robotics research work. It can be used to carry heavy equipment and array of sensors like LiDARs, IMUs and video cameras.

—————————–

Thanks to its suspensions system the vibrations on the frame are limited by the dampers and so the sensors output is steady and ready to use in MATLAB, ROS or in any other post-processing software.

Ask us more information

RC PulseIn, Analog and Digital I/O, RS232, Encoders

MaXXII-S comes with a very powerful controller able to provide multiple interfaces for several applications and needs. In particular, it includes a radio board with a remote control link up to 150 meters with a frequency of 433 Mhz or 2.4Ghz, different analog and digital I/Os, serial interfaces and a large set of sensors for odometry and environmental data like the RTK GPS and the 360° laser scanner.

Are you looking for a specific hardware configuration? Contact us!

Send us your configuration

CHECK OUT THE VIDEOS

Vehicle Dimensions
[mm]

Mechanical Specifications Value
Overall Dimensions 747x755x480 mm
Weight 90 Kg
Torque 45 Nm
Max Payload 90 Kg
Max Speed 1 m/s
Driving System Skid-steering
Locomotion System Tracks with suspensions
Control Specifications Value
Sensors GPS, IMU, Encoders
Battery pack Lithium 24VDC 30Ah
Drive Module
 2WD 24V DC Motors with Encoders
Motor controller
 Dual Channel Motor Controller
I/Os 6x Digital/PWM/Analog Input, RS232
Run Time 4 hours for normal use
Software ROS Node, C/C++ Libraries

Sensors and Add-ons

Laser Sensor

The standard sensor is the RPLidar 360° which provides a very accurate dataset both for indoor and outdoor applications; this kind of sensor is useful for obstacles detection.

Inertial Sensor

A 9Dof inertial sensor like the XSens Mti-300 is very useful when you have to develop an autonomous application and you need to retrieve the vehicle position in the 3D space.

Lights

A pair of LED lights are always needed when you need to make hte vehicle move and operate over the night or in very dark environments. They are IP67 with a low power consumption.

RTK GPS

The RTK GPS is a very important sensor to have when you are developing an autonomous application for outdoor environments. The U-blox solutions provides a very high accuracy.

RTK GPS

The vertical towbar can be mounted on the rear side of the robot’s frame to enable it to move heavy loads or even large trailers on wheels.

Don’t be shy!

Do you need more information about MAXXII-S robot?

Do you have a project and you want to develop it?
Do you need a specific mobile robotics base with tracks or wheels?
Are you looking for a particular electronics board to control motors or solenoids, for wireless communication or to develop a sensors network?

Let’s us know about your project and we will try to help you!



    Menu
    This website uses cookies to improve your experience. If you continue to use this site, you agree with it.
    Ok