info@robo-dyne.com
Language
ItalianEnglish
robodyne robotics

MEGA MAXXII
Tracked Mobile Robot

MEGA MAXXII is a large electric skid-steering tracked mobile robotic platform with a large capacity AGM battery pack specially designed for rough agricultural and industrial applications and to speed up your robotics research! You can easily add your own sensors or you can ask us to integrate them for you depending on your requirements. Usually, MEGA MAXXII is configured with 360° Laser Sensor, RGB-D camera, motor encoders, hall sensors and RTK GPS with a very high accuracy. Thanks to its rubber tracks, it can be used both for indoor and outdoor applications and its payload allows the users to add additional devices and laptops. Moreover, it provides several power output in order to connect multiple devices. This electric skid-steering robot with rubber tracks can be used for autonomous navigation for automation in agriculture or for industrial warehouses. The large ground clearance lets the vehicle to overcome obstacles like rocks and debris.

A TRACKED MOBILE ROBOT

MEGA MAXXII is  a skid-steer unmanned ground vehicle UGV designed to provide the maximum grip both on soft and hard surfaces for rough applications in particular for agricultural tasks and in warehouses.

_________________________________________

The tracks rollers and sprockets are made by high-density polyethylene (HMWPE) which is a hard rigid plastic coated with soft rubber for an excellent grip in every situation.

Ask us more information

IT IS ROS READY!

MAXXII comes with a well-documented ROS node which allows the user to remotely control the robot and to easily integrate sensors, devices and actuators. It also includes C/C++ library for cross-platform development and for third-party integration. The user can move the robot by using the standard geometry_msgs ROS messages.

ALL TERRAIN TRACKS

Thanks to its modular undercarriage, you can use MAXXII both for robotics indoor and outdoor applications; moreover, its soft rubber pads prevent slips on flat surfaces. The sprockets and the idle wheels are designed to balance the vehicle and to better distribute its weight on the ground by providing a large footprint and a great grip.

DRIVE OVER THE NIGHT

MAXXII is not afraid of the night! Thanks to a powerful 20W headlight with 1580lm mounted on its front and rear bumpers, you can face the night without problems! You can use this vehicle for surveillance or for inspections in no light conditions and in rough environments since boh lights are IP67 and come with LED technology.

FEEL THE POWER!

The vehicle is designed by using high quality components both for mechanical and electronics parts. The power supply comes from a 24VDC AGM fully isolated battery while the motors are able to provide a very high torque up to 40Nm. The onboard electronics board is able to accurately control the motors and all the sensors.

RC PulseIn, Analog and Digital I/O, RS232, Encoders

Mega MAXXII comes with a very powerful controller able to provide multiple interfaces for several applications and needs. In particular, it includes a radio board with a remote control link up to 150 meters with a frequency of 433 Mhz or 2.4Ghz, different analog and digital I/Os, serial interfaces and a large set of sensors for odometry and environmental data like the RTK GPS and the 360° laser scanner.

Are you looking for a specific hardware configuration? Contact us!

Send us your configuration

CHECK OUT THE VIDEOS

Vehicle Dimensions
[mm]

Mechanical Specifications Value
Overall Dimensions 955x920x500 mm
Weight 110 Kg
Torque 80 Nm
Max Payload 100+ Kg
Max Speed 1 m/s
Driving System Skid-steering
Locomotion System Rubber Tracks System
Control Specifications Value
Sensors GPS, IMU, Encoders
Battery pack AGM Fully Isolated 24VDC 50Ah
Drive Module
 2WD 24V DC Motors with Encoders
Motor controller
 Dual Channel Motor Controller
I/Os 6x Digital/PWM/Analog Input, RS232
Run Time 4 hours for normal use
Software ROS Node, C/C++ Libraries

Sensors and Add-ons

Laser Sensor

The standard sensor is the RPLidar 360° which provides a very accurate dataset both for indoor and outdoor applications; this kind of sensor is useful for obstacles detection.

Inertial Sensor

A 9Dof inertial sensor like the XSens Mti-300 is very useful when you have to develop an autonomous application and you need to retrieve the vehicle position in the 3D space.

Lights

A pair of LED lights are always needed when you need to make hte vehicle move and operate over the night or in very dark environments. They are IP67 with a low power consumption.

RTK GPS

The RTK GPS is a very important sensor to have when you are developing an autonomous application for outdoor environments. The U-blox solutions provides a very high accuracy.

Towbar

The vertical towbar can be mounted on the rear side of the robot’s frame to enable it to move heavy loads or even large trailers on wheels.

Don’t be shy!

Do you need more information about MAXXII robot?

Do you have a project and you want to develop it?
Do you need a specific mobile robotics base with tracks or wheels?
Are you looking for a particular electronics board to control motors or solenoids, for wireless communication or to develop a sensors network?

Let’s us know about your project and we will try to help you!



    Menu
    This website uses cookies to improve your experience. If you continue to use this site, you agree with it.
    Ok